[cisco-voip] H323 ATA

[Moataz Mamdouh]

hello scott
first of all , you have to upgrade your ata firmware to H.323 image ( you will find it on cisco.com) , to do this upgrade , you need an analog telephone connected to the FXS (phone 1) port of the ata & follow the IVR . also a computer attached to the ata using cross cable so u can load the h.323 image to the ata using some DOS commands , after finishing your upgrade , your ata is now an h.323 endpoint so you can register it with a gatekeeper easily.
hope this is useful
Scott Voll <svoll.voip at gmail.com> wrote: Newbie question:
  
 how do you register an ATA that has been changed to H323 to CM 4.1?  I've always ran SCCP on ATA's so sorry for the beginner question.
  
 I tried to do new phone --> H323.  Do I put the IP address in for the device name?
  
 Thanks
  
 Scott
 _______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

       
---------------------------------
Looking for last minute shopping deals?  Find them fast with Yahoo! Search.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080110/e31563aa/attachment.html