[cisco-voip] VTA problem in CME

[Tony Gan]

Hi，all

I installed the CME on the 2851 router,  the version of  it is 4.1(0).
Under this environment.,  the customer installed two VT Camera II.   I have
confirmed that the video function had been enabled, and the video enabled
icon had already been shown on the IP phone screen.

 

     After I use the command “ show ephone registered” , it shows as
follows:

   

ephone-7 Mac:001E.136C.348D TCP socket:[8] activeLine:0 REGISTERED in SCCP
ver 12 + Video and Server in ver 8

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
caps:8

IP:172.19.101.10 50756 7941   keepalive 70493 max_line 2

button 1: dn 5  number 2110 CH1   IDLE         CH2   IDLE         

Username: Howey Password: 12345 

 

ephone-20 Mac:0016.6F0C.D7FB TCP socket:[18] activeLine:0 REGISTERED in SCCP
ver 9 + Video and Server in ver 8

mediaActive:0 offhook:0 ringing:0 reset:0 reset_sent:0 paging 0 debug:0
caps:7

IP:172.19.29.110 3699 CIPC   keepalive 24 max_line 8

button 1: dn 20 number 2008 CH1   IDLE

 

But when I make a call between two IP phones, Phone with the DN “2110”only
shows local window and Phone with the DN “2008” only shows remote window.

I`d like to know how to resolve this kind of problem. Could anybody please
help me about that? Thanks a lot! 

 

 

Thanks & Best Regards

----------------------------------------------------------------------------
--------------------------------------------------------------------

Tony Gan / 干荣刚

Technical Engineer , RightCall Technologies

ATP图标

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080115/76ccc19a/attachment.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/jpeg
Size: 4924 bytes
Desc: not available
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080115/76ccc19a/attachment.jpe