[cisco-voip] Night Bell Pickup Group

[Kevin Dunn]

AH HA

Disregard, I am as dumbas I look

Had to set not only partition, but also CSS and Network Hold Audio Source on
DN and THEN the Call Pickup Group appeared in drop down...

Sorry for the bother..

Kevin


On 1/17/08, Kevin Dunn <cheesevoice at gmail.com> wrote:
>
> right, I am sorry that is exactly what I was trying to do:
> I go to the Gateway in CCM and click on 0/2/0 and see the Extension (9500)
> and click that under the forward conditions,is the Pickup Group pull down
> and that has no options under it.
>
> Thanks for the clarification
>
> Kevin
>
>
>  On 1/17/08, Clouse, Chris <chris.clouse at berbee.com> wrote:
> >
> >  You should be able to add the DN of the port, not the port itself.  See
> > if that is there.
> >
> >
> >
> > Chris
> >
> >
> >
> > *From:* cisco-voip-bounces at puck.nether.net [mailto:
> > cisco-voip-bounces at puck.nether.net] *On Behalf Of *Kevin Dunn
> > *Sent:* Thursday, January 17, 2008 10:23 AM
> > *To:* Cisco Voice
> > *Subject:* [cisco-voip] Night Bell Pickup Group
> >
> >
> >
> > Gateway is MGCP (2811)
> >
> > Call Manager is 4.1.3
> >
> >
> >
> > Calls No Answer/Busy on receptionist ring Night Bell (9500 extension) an
> > FXS port on the gateway(voice-port 0/2/0).  I set everyone in the office on
> > the same PickUp Group (called NightBell) so when the NightBell rings they
> > can grab the call.  But I can't add the FXS port to the Pickup Group.
> >
> >
> >
> > What am I doing incorrectly (obvious statements of noted mental illness
> > are uncalled for Scott...lol)
> >
> >
> >
> > Thanks Guys
> >
> >
> >
> > Kevin
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080117/1a1fa606/attachment.html