[cisco-voip] Getting state message from mobile phones

[Wes Sisk]

Robert,

Thanks for the clarification.   Please flip the CM service parameter as 
well.

/Wes

Robert Kulagowski wrote:
> Wes Sisk wrote:
>> Robert,
>>
>> Are you MGCP or H.323?
>
> H.323
>
>> You are receiving Disconnect with PI:
>> 055477: Jan 17 13:30:09.567: ISDN Se0/1/0:23 Q931: RX <- DISCONNECT 
>> pd = 8  callref = 0x8990
>>        Cause i = 0x8392 - No user responding
>>        Progress Ind i = 0x8288 - In-band info or appropriate now 
>> available
>> 055478: Jan 17 13:30:09.567: ISDN Se0/1/0:23 Q931: call_disc: PI 
>> received in disconnect; Postpone sending RELEASE for callid 0x8911
>>
>> And IOS thinks it should delay sending Release complete, however the 
>> RC goes out after only 20 msec:
>> 055479: Jan 17 13:30:09.575: ISDN Se0/1/0:23 Q931: TX -> RELEASE pd = 
>> 8 callref = 0x0990
>>
>> Have you tried the command or service parameter I mentioned?
>
> Yes:
>
> >> I tried all the voice call convert-discpi-to-prog, but no joy.
>
> They're globals, and I tried "tunnel-ie", "always", and "always 
> tunnel-ie".  No combination seemed to change what the caller heard.