[cisco-voip] How to add CLI

[Kevin Dunn]

IF you are referring to Calling Line Information (CLI) then that is up to
the service provider.  The Telco needs to send you CNAM and CNUM, typically
you are guaranteed CNUM delivery but not always CNAM.

Is that answering your question?

Kevin


On 1/21/08, Aing Roda <roda_3tel at yahoo.com> wrote:
>
>  Hi,
>
> I am new to VoIP and Cisco. I have the following problem.
>
> I am using Cisco AS5400 to terminate VoIP traffic and send the traffic to
> telcos using SS7 signaling. Some of our customers do not send CLI to us. How
> can I add CLI to those incoming calls?
>
> Thank you in advance.
>
> Roda
>
> ------------------------------
> Looking for last minute shopping deals? Find them fast with Yahoo! Search.<http://us.rd.yahoo.com/evt=51734/*http://tools.search.yahoo.com/newsearch/category.php?category=shopping>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080121/7510e583/attachment.html