[cisco-voip] unity 5.0

[Pat Hayes]

Take a look at this doc, it explains, among other things, how Unity 
determines if a mailbox is over it's limit. It should point you in the 
direction of why Unity thinks the mailbox is over limit.

http://www.cisco.com/en/US/products/sw/voicesw/ps2237/products_white_paper09186a00800faf0f.shtml

-------- Original Message  --------
From: "Scott Voll" <svoll.voip at gmail.com>
To: "cisco-voip at puck-nether.net" <cisco-voip at puck.nether.net>
Subject: [cisco-voip] unity 5.0
Date: 1/24/2008 12:25 PM

> I upgraded to Unity 5.0es21 last month and eveything has been going fine.
>  
> today I get a message that people are getting the VM is full.  it 
> happened on more then one VM box. 
>  
> we are backended with Exchange 2k3 UM.  We don't have limits on Exchange.
>  
> So how do I start troubleshooting this? 
>  
> I don't see anything in event viewer.
>  
> I have not rebooted but the problem has gone away.  Any ideas?  I 
> searched the bug tool and found nothing close.
>  
> I turned on the "email errors to me" (event Monitoring service) to see 
> if anything comes up. but nothing thus far.
>  
> TIA
>  
> Scott
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip