[cisco-voip] Can the BAT tool for CCM 3.3 export phone and user information?

[Jonathan Charles]

No, you can't

It may be easier to upgrade to 4.1 and then export your phones, etc,
or import them into 4.1 and then use that to upgrade...



Jonathan

On Jan 28, 2008 10:12 AM, Patrick Mowry <pmowry at getgds.com> wrote:
> Yes, but I need to combine 3 clusters into 1, and I don't think I can import more than 1 dma file.  And then I'm concerned with getting a license file if I stage everything offline and phones never register to the intermediate 4.1 system.
>
>
>
> -----Original Message-----
> From: Jonathan Charles [mailto:jonvoip at gmail.com]
> Sent: Mon 1/28/2008 10:00 AM
> To: Patrick Mowry
> Cc: cisco-voip at puck.nether.net
> Subject: Re: [cisco-voip] Can the BAT tool for CCM 3.3 export phone and user information?
>
> I have had no real problems with the CCM 3.3 to 6.0 upgrades...
>
> Just build a new box with 3.3, restore your backup, upgrade to 4.1 and
> then run DMA and install 6.1..
>
>  No biggie...
>
>
> Jonathan
>
> On Jan 28, 2008 9:57 AM, Patrick Mowry <pmowry at getgds.com> wrote:
> > Short version is I have to upgrade 3 3.3 clusters to one CCM 6.1
> > cluster.  And since I can't use the DMA tool to combine them all, I was
> > hoping I could export the user, phone and line information from each
> > cluster and import them into a fresh build 6.1 system.  The largest
> > cluster only has 650 phones.  The other two about 270 total.
> >
> > I'm hoping to avoid upgrading the larger publisher 3 times as well (
> > 3.3(3) ->3.3(5) -> 4.2 ->6.1).  But I'm thinking I can't avoid this, and
> > I'll have to upgrade each of the smaller systems to 4.2 so I can export
> > them with the BAT tool.  Unless I can find some nice sql queries that
> > can do the same thing.
> >
> >
> > Thanks for reading through all that,
> >
> > -Patrick
> > _______________________________________________
> > cisco-voip mailing list
> > cisco-voip at puck.nether.net
> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >
>
>