[cisco-voip] SRST Hunt Group

[CarlosOrtiz at bayviewfinancial.com]

Can someone post a known working/tested  config of hunting to several 
phones using just SRST commands?   Originally I had the config below 
thinking that the preference numbers would allow the call to roll to the 
next phone if the first extension already had a call.  Instead the 2nd 
call continued to ring the first phone on the list.  Do I need to limit 
the number lines per phone to make this work?   Will that have adverse 
affects on other services like transfer, conf,  etc?

call-manager-fallback
 max-conferences 8 gain -6
 transfer-system full-consult
 limit-dn 7910 1
 limit-dn 7935 1
 limit-dn 7940 2
 limit-dn 7960 6
 ip source-address 10.X.X.X port 2000
 max-ephones 300
 max-dn 600
 system message primary SRST
 system message secondary SRST
 voicemail XXXXXXXXXXX
 no huntstop
 alias 1 1376 to 1320 preference 1
 alias 2 1376 to 1302 preference 2
 alias 3 1376 to 8806 preference 3
 alias 4 1376 to 8814 preference 4
 alias 5 1376 to 8809 preference 5
 alias 6 1376 to 8834 preference 6
 alias 7 1376 to 8807 preference 7
 alias 8 1376 to 1319 preference 8
 alias 9 1376 to 1394 preference 9
 alias 10 1376 to 1307 preference 10

 call-forward busy XXXXXXXXXXX
 call-forward noan XXXXXXXXXXX timeout 20


Carlos
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080128/006ff637/attachment.html