[cisco-voip] VG224 + SCCP + FAX + CCM4.1(3) supported?

[Scott Voll]

What kind of Fax?  have you turned off ECM (error correction mode) and super
G3 (33.6)?  if not, turn them off and try again.  that's the only thing I
can think of.  I don't have a VG so it's just a guess based on what I have
had to do with ATAs.

Scott

On Jan 28, 2008 3:41 PM, Paul Choi <asobihoudai at yahoo.com> wrote:

> I have installed the latest IOS on the VG224 and have
> the needed ports registered on the CCM cluster using
> SCCP. Voice calls work fine. FAX transmissions however
> don't work the first time around. The first time I
> transmit, I get nothing. The second time the fax is
> automatically retried, it apparently sends ok.
>
> Is SCCP + fax passthrough just not supported? I see no
> documentation on this on Cisco's website.
>
> I'm pulling my hair out.... :(
>
> Paul
>
>
>
>  ____________________________________________________________________________________
> Looking for last minute shopping deals?
> Find them fast with Yahoo! Search.
> http://tools.search.yahoo.com/newsearch/category.php?category=shopping
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080128/a2b0a64a/attachment.html