[cisco-voip] Replacing motherboard in MCS-7815-I2 server -- Ethernet issues

[Jonathan Charles]

Is it possible the new motherboard has a bad ethernet interface?


Jonathan

On Jan 28, 2008 10:02 PM, Erick Bergquist <erickbee at gmail.com> wrote:
> Hi,
>
> Anyone ever have the system board fail in a IBM 7815-I2 and have a new
> one put in by IBM, and then CCM 5.1.1.3126-1 complain about the MAC
> address not being what it used to be and fixing this without a
> rebuild? The Ethernet interface is not coming up at all.
>
> We went through the Recovery DVD and that did not help, and we set the
> IP Address, etc on the eth0 interface through console but we can not
> bring the Eth0 interface up. When we try it sits there and seems to
> get hung up.
>
> Erick
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>