[cisco-voip] Adding subscriber to 6.1.1 cluster

[Jason Aarons (US)]

Quick question - I have a customer who is running UCM 6.1.1.  They want
to add another Subscriber, there is no bootable 6.1.1 media on CCO.
Customer needs to build a 6.0 Sub and then upgrade to 6.1.1.  When they
build the Sub, it asks for Pub info and when it verifies the Sub, it
comes back with version mismatch.  Any ideas on how to get around this?





-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080130/06dd0edb/attachment-0001.html