[cisco-voip] CCM DevPack and SR Interactions

[Scott Voll]

personally, I go into the phones.  Select 50 phone and click reset. when
those 50 come up then I go onto the next 50.  Kind of painful but I
*usually* don't have phone locked up in the morning when I come in.


Scott

On Jan 30, 2008 1:06 PM, Matthew Melbourne <matt at melbourne.org.uk> wrote:

> I'm considering an upgrade to CCM 4.1(3)SR6. However, this has not yet
> appeared on the compatibility matrix with CRS 4.0(5).
>
> In order to add device support for the 7921s, it is necessary to apply a
> DevPack. I was hoping to do this with the application of SR6 which itself
> includes DevPack 64.
>
> If I apply the standalone DevPack 65 (which is compatible with the
> existing CCM 4.1(3)SR2, will the later application of SR6 overwrite the
> device loads set by DevPack 65?
>
> Obviously, when device loads get updated there is the possibility that a
> large number of phones will attempt to update at the same time. What is
> the robustness of this procedure (assuming one TFTP server on the
> Publisher)? Is it advisable to reload phones in a controlled manner,
> perhaps on a site-by-site basis by bouncing switch ports?
>
> Cheers,
>
> Matt
>
> --
> Matthew Melbourne
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080130/f0fe3c3c/attachment-0001.html