[cisco-voip] CallManager 4.31 Installation Help

[Greg Ayoub]

Hello,

I am attempting to install CallManager OS 2003.1.1 onto a HP DL380.   The 
hardware architecture is as follows:

Dual Xenon 3.4Mhz CPU
2 Gb RAM
2 (72)Gb Hardrives
6i Raid controller v2.80
BIOS firmware rev P-51 2006/04/26

On first installation attempt the installation wanted 4 Gb RAM, 4 hard 
drives total, and Array controller firmware REV 2.6a.  So I stuffed in more 
memory and drives, and back-rev'd the firmware.  Now the installation fails 
while attempting to configure the array controller and I get the following 
message:

The configuration of the array controller failed!  This can be caused by 
unexpected
hardware or a hardware failure within the system.  Error code:2832

My guess is that the installer program does not like something about my old 
callmanager hardware -- but i have checked the hardware compatibility matrix 
and everything *appears* to be a match including the 6i RAID controller.  I 
have also tried installing on a similar server and I still get the same 
errors.  Is there something I am missing, or perhaps a workaround?

Thanks.