[cisco-voip] how to factory default an NME-CUE

Wed Jul 2 13:56:50 EDT 2008

Session into the CUE module and bring it offline with the 'offline' command.  Then do the command 'restore factory default'.  You may need to be in enable mode to use this command, I forget...

....................................................................................   

Keith Klevenski
Manager, Telephony Engineering

1880 S. Dairy Ashford, Suite 300  |  Houston, TX  77077- 4760

Tel: 281.674.0702  |  Mobile: 713.677.3925  |  Fax: 281.674.0101
keith.klevenski at rig.net
www.rig.net

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Joe Cisco
Sent: Wednesday, July 02, 2008 11:45 AM
To: cisco-voip
Subject: [cisco-voip] how to factory default an NME-CUE

Does anyone know how to factory default an "NME-CUE" unity express
module? I "biffed" it up and want to start over at the IOS config
wizard level.

Thanks,

Joe C.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip