[cisco-voip] Append LD Access code on outbound call

[Carter, Bill]

Telco requires a 3-digit access code for long distance calls. Customer
would like to NOT have to dial a code when faxing to a LD number. Is
this possible??

 

Background:

PSTN connection is PRI

Telco says LD code required for all outbound calls. (can't disable based
on calling party #)

GW is H323

 

 

 

Gateway Attempts:

On the gateway I tried a standard dial peer with  "translate-outgoing
called". I tried post-pending a ,022 to the string (, is supposed to
insert a pause and 022 is the telco access code).

 

voice translation-rule 10

 rule 1 /^\#\(1[2-9]..[2-9]......\)/ /\1\2,022/

 

test voice translation-rule 10 #14085551212

Matched with rule 1

Original number: #14085551212   Translated number: 14085551212,022

Original number type: none      Translated number type: none

Original number plan: none      Translated number plan: none

 

dial-peer voice 300 pots

 description -- POTS Dial peer to route calls out PRI --

 destination-pattern #1[2-9]..[2-9]......

 translate-outgoing called 10

 incoming called-number .

 direct-inward-dial

 port 0/1/0:23

 prefix 1

 

I tried "forward-digits extra" which is supposed to send any digits
longer than the length of the destination-pattern. Didn't work.

 

CallManager Attempts:

I also tried the CallManager translation-pattern route:

 

Translation Pattern

91[2-9]XX[2-9]XXXXXX

Calling Party Transformation Mask

XXXXXXXXXXXX022

DNA analysis gives the following

Dialed number 914085551212

Result ???714085551022

 

 

 

 

Bill Carter

Sr Business Communications Analyst

Sentinel Technologies, Inc

217.391.5015

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080710/c8e49361/attachment-0001.html>