[cisco-voip] NM-16ESW-PWR

[Mark Holloway]

Does anyone know the part number?  The standard part number for the 3725
power supply is PWR-3725-AC= .   Unlike the 2800/3800 series, there is no
PWR-3725-AC-IP=to identify that it supports inline power.

 

Thanks,

Mark

 

 

From: Jason Aarons (US) [mailto:jason.aarons at us.didata.com] 
Sent: Friday, July 11, 2008 1:26 PM
To: Mark Holloway
Subject: RE: [cisco-voip] NM-16ESW-PWR

 

AC-IP

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Mark Holloway
Sent: Friday, July 11, 2008 1:12 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] NM-16ESW-PWR

 

Does the 3725 router require a special power supply to support the
NM-16ESW-PWR?   I'm having difficulty powering 7940/7960 phones with inline
power.  The "show diag" command displays both the NM-16ESW and the PWR
daughter card.  CDP is enabled and inline power is set to auto.  I've
slotted the NM in two different 3725 routers and inline power is not
working.  I suspected a faulty PWR daughter card  but I would then I
wouldn't expect to see the PWR in the "show diag" output.  I've also tried
re-seating the PWR daughter card.  Ethernet switch functionality works fine.

 

Regards,

Mark

 

 

 

  _____  

Disclaimer: This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the designated
addressee(s) named above only. If you are not the intended addressee, you
are hereby notified that you have received this communication in error and
that any use or reproduction of this email or its contents is strictly
prohibited and may be unlawful. If you have received this communication in
error, please notify us immediately by replying to this message and deleting
it from your computer. Thank you. 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080711/3e09ec67/attachment.html>