[cisco-voip] how to load dsp firmware

[Peter Slow]

Justin, good tip.

This is going to be dependent on the platform you're on. for ISR
platforms with 5510 DSPs, you'll actually put a ".rbf" file on the
flash and it gets loaded automatically at boot time, instead of the
one bundled in the IOS binary.

defects in 53xx VCware and general DSPware is accessible to customers
through the bug toolkit. Those defects are filed in the same system
that other IOS defects are. Unfortunately, you'll find that some of
the defects are filed against the firmware version as opposed to the
IOS version, so you'll need to know the version of dspware you're
troubleshooting to make any sort of guess as to if you're affected by
a defect..

I was looking for an updated matrix that has the IOS + Bundled DSPWare
versions to post here, but am giving up trying to find it for right
now =) i found one but it was from 2002.

-Peter


On Sat, Jul 12, 2008 at 12:36 PM, Justin Kennedy <jkennedy at sofs.cc> wrote:
> Found this thread after finding the odd file on a flash card.
>
>
>
> It looks like you need to load the firmware on the PVDM, then the file can
> be deleted from the flash card. Here's the link. Search for
>
> "firmware location vfc-dsp-upw-7.0.1.2.bin"
>
>
>
> http://www.cisco.com/en/US/docs/routers/access/as5350xm/software/configuration/guide/54vfc.html
>
>
>
>
>
>
>
> Anyone know where to find known bugs for other DSP firmwares?
>
>
>
>
>
>
>
>
>
>
>
> Justin Kennedy
> Stallion Oilfield Services
> StaRComm VSAT Administrator
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>