[cisco-voip] CVP 4.1

[Jason Aarons (US)]

You may need to clarify your question and setup and version of
CallManager. Are you using SIP or H323 with CVP? I'm not sure what type
2 and type 10 on a VRU is.

 

I understand there is a ES for CVP that makes CVP no longer require a
MTP resource for H323/SIP calls.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of
Humayun.Sami/NE/Karachi
Sent: Tuesday, July 15, 2008 10:02 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] CVP 4.1

 

Dear All,

 

hello....

 

Can warm transfer be handled without Call director...Will I loose the
type 2 and type 10 functionality on VRU.

 

Regards,

Humayun Sami...




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080715/8508307d/attachment.html>