[cisco-voip] LDAP Search Refinement

[James Buchanan]

On this, I usually have to do the Update Users to associate the device
or profile then have to run it again to set the Primary Extension. The
Primary Extension does not set until a device of some sort (or device
profile) is associated.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Erik Goppel
Sent: Tuesday, July 15, 2008 5:00 PM
To: Jonathan Charles
Cc: cisco-voip at puck-nether.net
Subject: Re: [cisco-voip] LDAP Search Refinement

 

Were you able to specify the primary extension during the update of the
users.

we tried, however it does not set the primary extension in cm 6.1.2.

I have opened a tac case for that, and we are still trying, to get it
done through BAT.

 

Erik

On Fri, Dec 21, 2007 at 5:53 PM, Jonathan Charles <jonvoip at gmail.com>
wrote:

Update users... in BAT...

And on the BAT file just fill out username and Controlled
Device/Profile 1 (you will need to change Number of Controlled
Devices/Profiles from 0 to 1 first) and then BAT it in...



Jonathan


On Dec 21, 2007 9:31 AM, Lemon <lemon at lemon.za.net> wrote:
> On Dec 21, 2007 5:22 PM, Jonathan Charles <jonvoip at gmail.com> wrote:
> > Where do you do that?
> >
>
> Yup, maybe Wes can update the list with those pointers. Also, how
> would you go about updating those users and associating them with
> their Device Profiles using BAT ??
>
> Thnx
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080715/c406920a/attachment-0001.html>