[cisco-voip] Populating the CGN field on a PRI setup message

[Brian]

Has anyone heard of this?  I'm being told by this telco that the Caller ID
display number is in a different field that the CGN number.  AIN requires a
10 digit CGN number in order to launch a query.

Thanks,
Brian


On Mon, Jul 14, 2008 at 6:11 PM, Brian <bms314 at gmail.com> wrote:

> We are running CUCM 6.1.1.3000 with a 2851 MGCP gateway running
> 12.4(15)T4.  Our local PRI NI2 service provider is requesting that the CGN
> field is populated in call setup messages in order to populate the Charge
> field in SS7 messages to the LD provider.  I have verified with a Q931 debug
> that we are sending the Calling number, but there is apparently an
> additional CGN field with the same info.
>
> Does anyone know how I can populate this field in the ISDN setup messages?
> I assume it's a setting on the gateway config, but a CCO/Netpro search has
> come up blank.
>
> Thanks for the help.
>
> Brian
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080717/6b7f782f/attachment.html>