[cisco-voip] cucme, ring group?

[Gheorghe PLETEA]

Can you call AA 1599 from any IP phone?

George


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Dan Letkeman
Sent: Saturday, 19 July 2008 13:27
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] cucme, ring group?

Hello,

I'm trying to setup a small office, which is running a CUCME system, so
that 3 of the 7 phones ring when someone calls the office.  I have tried
the following, with no success.

voice hunt-group 1 parallel
 final 1599
 list 1501,1510,1511
 timeout 18
 pilot 1591

1599 - autoattendant

It rings on all of the phones, but then I get a busy signal after the
timeout.  Not sure whats going on, but I'm assuming it should work to go
to auto attendant after no body answers.

Is there a different way to do this?


Thanks,

Dan.
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


TelstraClear - Best speed, Best price, Best performance, Best loved, Best join.... phone Residential 0508 888 800  Business 0508 249 777

This email contains information which may be confidential and subject to copyright.  If you are not the intended recipient you must not use, distribute or copy this email or attachments.  If you have received this email in error please notify us immediately by return email and delete this email and any attachments.  
TelstraClear Limited accepts no responsibility for changes made to this email or to any attachments after transmission from TelstraClear Limited.  It is your responsibility to check this email and any attachments for viruses.   
Emails are not secure.  They can be intercepted, amended, lost or destroyed and may contain viruses.  Anyone who communicates with TelstraClear Limited by email is taken to accept these risks.