[cisco-voip] iBLC transcoding and the CMM-ACT Module

[Matthew Linsemier]

All,

I see that iBLC transcoding was introduced in 12.4(15)XY in IOS... Does
anyone know when this will be available for the CMM-ACT modules?  I don¹t
believe that the 12.4(15)T5 train has support as XY was released after.  We
currently use g.729 for around 30-35 remote teleworkers, and we are hoping
to swap out their phones for 7945¹s to use iBLC.  However, if we can¹t
transcode for Unity, MPE, or UCCX, that¹s going to be an issue.

Matt

CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080722/e70f28b8/attachment.html>