[cisco-voip] Call Waiting "beep" on CUCM 6.x Secondary Line

[Jonathan Charles]

The audible beep is call waiting...

Disable it with the CCM service parameter "Ring Setting for Busy
Station" the default is beep only... change it to disabled.



Jonathan

On Tue, Jul 22, 2008 at 1:33 PM, Pattishall, Jan
<Jan.Pattishall at synergit.com> wrote:
> Hi All,
>
>
>
> I am trying to track this down; but it appears that in CUCM 6.1 when you
> have a secondary line on a phone, even when you set that line to "disable"
> for both active and idle states on that phone, it still produces an audible
> beep to the user if they are on their primary line when a call comes in to
> the second.
>
>
>
> I would presume (and thought in the past) that setting the line to "disable"
> would stop the audible beep.
>
>
>
> Any help would be appreciated.
>
>
>
> Jan Pattishall
>
> Senior Voice and Infrastructure Engineer
>
>
>
> synergIT Incorporated - A PC Solutions Company
>
> 811 Camp Horne Road
>
> Pittsburgh, PA 15237
>
>
>
> 412.391.8558 (phone)
>
> 412.391.6576 (fax)
>
>
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>