[cisco-voip] Connected an Avaya G700 to a Cisco Gateway that is connected to 4.1.3

[Matthew Saskin]

A lot is going to depend on how the Avaya is configured.  For starters, 
is your G700 currently set to be user-side with a switch type of 
primary-ni (based on your IOS config below)

What is the output of 'show controllers t1' and 'sh isdn stat'?

-matt

Leetun, Rob wrote:
>
> Hi all,
>
>  
>
> We are new to this kind on configuration with an Avaya connected to a 
> gateway.  When I call a number on the Avaya G700 I get a fast busy.  
> But I believe our ISDN connect is not configured correctly?  Can 
> someone help, please?
>
>  
>
>  
>
> interface Serial0/2/0:23
>
>  no ip address
>
>  encapsulation hdlc
>
>  isdn switch-type primary-ni
>
>  isdn protocol-emulate network
>
>  isdn incoming-voice voice
>
>  isdn send-alerting
>
>  isdn sending-complete
>
>  no cdp enable
>
>  
>
>  
>
> Thanks,
>
>  
>
> Rob Leetun
>
> Networking
>
> Boulder County IT
>
> 303-441-3866
>
> 303-441-3983 (fax)
>
> rleetun at bouldercounty.org
>
>  
>
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>