[cisco-voip] dspfarm profile max sessions

[Jonathan Charles]

My general rule of thumb is to allocate all remaining DSPs (minus
voice interfaces) to conferencing/transcoding... if they aren't being
used by interfaces, might as well allocate em somewhere...



Jonathan

On Wed, Jul 23, 2008 at 10:17 AM,  <steve.siltman at assurant.com> wrote:
>
> Good Morning to all Voice Geeks!
>
> I normally put max sessions of 2 on both transcoding and conference
> profiles.  How would I determine whether or not I need to increase this?  If
> an office has 10 phones, is this fine?  What if an office has 50 phones,
> should I increase this higher?  I assume I have plenty of DSPs to work with
> since the ? shows that I can enter up to 33 max sessions.
>
> I ask this because one of my offices has intermittent call conferencing
> problems.
>
> Thanks,
>
> Steve Siltman
> Assurant Corporate Technology
> Network Engineer
> Work: 651-361-4752
> Cell: 651-336-5563
> steve.siltman at assurant.com
>
> ________________________________
> This e-mail message and all attachments transmitted with it may contain
> legally privileged and/or confidential information intended solely for the
> use of the addressee(s). If the reader of this message is not the intended
> recipient, you are hereby notified that any reading, dissemination,
> distribution, copying, forwarding or other use of this message or its
> attachments is strictly prohibited. If you have received this message in
> error, please notify the sender immediately and delete this message and all
> copies and backups thereof.
>
> Thank you.
>
> ________________________________
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>