[cisco-voip] CCM and FXO on 2801

Mark J markju at gmail.com
Thu Jul 24 00:04:09 EDT 2008 

Thanks Joe,

Here is the output:

*Jul 24 14:16:08.064 AEST:  HTSP endpoint_info=aaln/S0/SU0/0, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!

*Jul 24 14:16:08.068 AEST: htsp_timer_stop3 htsp_setup_req
*Jul 24 14:16:08.072 AEST: htsp_process_event: [0/0/0, FXOGS_ONHOOK,
E_HTSP_SETUP_REQ]fxogs_onhook_setup
*Jul 24 14:16:08.072 AEST: [0/0/0] set signal state = 0x0 timestamp = 0
*Jul 24 14:16:08.072 AEST: dsp_set_sig_state: [0/0/0] packet_len=12
channel_id=128 packet_id=39 state=0x0 timestamp=0x0
*Jul 24 14:16:08.072 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 0, 65535,
1, TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
sjp-2801-01#u all
*Jul 24 14:16:08.072 AEST: htsp_timer - 10000 msec
sjp-2801-01#u all
*Jul 24 14:16:18.076 AEST: htsp_process_event: [0/0/0,
FXOGS_WAIT_TIP_GROUND, E_HTSP_EVENT_TIMER]fxogs_offhook_disc
*Jul 24 14:16:18.076 AEST: htsp_timer_stop
*Jul 24 14:16:18.076 AEST: [0/0/0] set signal state = 0x4 timestamp = 0
*Jul 24 14:16:18.076 AEST: dsp_set_sig_state: [0/0/0] packet_len=12
channel_id=128 packet_id=39 state=0x4 timestamp=0x0
*Jul 24 14:16:18.076 AEST: htsp_timer - 2000 msechtsp_release_req: cause 16,
no_onhook 0
*Jul 24 14:16:18.080 AEST: htsp_process_event: [0/0/0, FXOGS_ONHOOK,
E_HTSP_RELEASE_REQ]fxogs_onhook_release
*Jul 24 14:16:18.080 AEST: htsp_timer_stop2
*Jul 24 14:16:18.080 AEST: htsp_timer_stop3
*Jul 24 14:16:18.080 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 0, 65535,
1, TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*Jul 24 14:16:18.080 AEST: flex_dsprm_close_cleanuphtsp_allocate_if --

*Jul 24 14:16:18.112 AEST:  HTSP endpoint_info=aaln/S0/SU0/1, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!

*Jul 24 14:16:18.116 AEST: htsp_timer_stop3 htsp_setup_req
*Jul 24 14:16:18.120 AEST: htsp_process_event: [0/0/1, FXOGS_ONHOOK,
E_HTSP_SETUP_REQ]fxogs_onhook_setup
*Jul 24 14:16:18.120 AEST: [0/0/1] set signal state = 0x0 timestamp = 0
*Jul 24 14:16:18.120 AEST: dsp_set_sig_state: [0/0/1] packet_len=12
channel_id=129 packet_id=39 state=0x0 timestamp=0x0
*Jul 24 14:16:18.120 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 1, 65535,
1, TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*Jul 24 14:16:18.120 AEST: htsp_timer - 10000 msechtsp_allocate_if --

*Jul 24 14:16:18.124 AEST:  HTSP endpoint_info=aaln/S0/SU0/0, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!
htsp_allocate_if --

*Jul 24 14:16:18.144 AEST:  HTSP endpoint_info=aaln/S0/SU0/0, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!

sjp-2801-01#u all
*Jul 24 14:16:18.344 AEST: htsp_process_event: [0/0/0, FXOGS_ONHOOK,
E_DSP_SIG_0110]
*Jul 24 14:16:18.348 AEST: fxogs_line_reversal_clid_wait. On_hook line
reversal detected possibily due to crossed cable
sjp-2801-01#u all
*Jul 24 14:16:20.076 AEST: htsp_process_event: [0/0/0, FXOGS_ONHOOK,
E_HTSP_EVENT_TIMER]
*Jul 24 14:16:20.076 AEST: [0/0/0, FXOGS_ONHOOK, E_HTSP_EVENT_TIMER]  ->
ERROR: INVALID INPUT
sjp-2801-01#u all
*Jul 24 14:16:28.120 AEST: htsp_process_event: [0/0/1,
FXOGS_WAIT_TIP_GROUND, E_HTSP_EVENT_TIMER]fxogs_offhook_disc
*Jul 24 14:16:28.120 AEST: htsp_timer_stop
*Jul 24 14:16:28.120 AEST: [0/0/1] set signal state = 0x4 timestamp = 0
*Jul 24 14:16:28.120 AEST: dsp_set_sig_state: [0/0/1] packet_len=12
channel_id=129 packet_id=39 state=0x4 timestamp=0x0
*Jul 24 14:16:28.120 AEST: htsp_timer - 2000 msechtsp_release_req: cause 16,
no_onhook 0
*Jul 24 14:16:28.124 AEST: htsp_process_event: [0/0/1, FXOGS_ONHOOK,
E_HTSP_RELEASE_REQ]fxogs_onhook_release
*Jul 24 14:16:28.124 AEST: htsp_timer_stop2
*Jul 24 14:16:28.124 AEST: htsp_timer_stop3
*Jul 24 14:16:28.124 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 1, 65535,
1, TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*Jul 24 14:16:28.124 AEST: flex_dsprm_close_cleanuphtsp_allocate_if --

*Jul 24 14:16:28.144 AEST:  HTSP endpoint_info=aaln/S0/SU0/2, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!

*Jul 24 14:16:28.148 AEST: htsp_timer_stop3 htsp_setup_req
*Jul 24 14:16:28.152 AEST: htsp_process_event: [0/0/2, FXOGS_ONHOOK,
E_HTSP_SETUP_REQ]fxogs_onhook_setup
*Jul 24 14:16:28.152 AEST: [0/0/2] set signal state = 0x0 timestamp = 0
*Jul 24 14:16:28.152 AEST: dsp_set_sig_state: [0/0/2] packet_len=12
channel_id=130 packet_id=39 state=0x0 timestamp=0x0
*Jul 24 14:16:28.152 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 2, 65535,
1, TGRM_CALL_BUSY, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*Jul 24 14:16:28.152 AEST: htsp_timer - 10000 msechtsp_allocate_if --

*Jul 24 14:16:28.156 AEST:  HTSP endpoint_info=aaln/S0/SU0/1, type=2,
under_specifie
sjp-2801-01#u alld=0,
               service_type=2htsp_allocate_if: MATCH!
htsp_allocate_if --

*Jul 24 14:16:28.172 AEST:  HTSP endpoint_info=aaln/S0/SU0/1, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!

*Jul 24 14:16:28.388 AEST: htsp_process_event: [0/0/1, FXOGS_ONHOOK,
E_DSP_SIG_0110]
*Jul 24 14:16:28.388 AEST: fxogs_line_reversal_clid_wait. On_hook line
reversal detected possibily due to crossed cable
sjp-2801-01#u all
*Jul 24 14:16:30.120 AEST: htsp_process_event: [0/0/1, FXOGS_ONHOOK,
E_HTSP_EVENT_TIMER]
*Jul 24 14:16:30.120 AEST: [0/0/1, FXOGS_ONHOOK, E_HTSP_EVENT_TIMER]  ->
ERROR: INVALID INPUT
sjp-2801-01#u all
*Jul 24 14:16:38.152 AEST: htsp_process_event: [0/0/2,
FXOGS_WAIT_TIP_GROUND, E_HTSP_EVENT_TIMER]fxogs_offhook_disc
*Jul 24 14:16:38.152 AEST: htsp_timer_stop
*Jul 24 14:16:38.152 AEST: [0/0/2] set signal state = 0x4 timestamp = 0
*Jul 24 14:16:38.152 AEST: dsp_set_sig_state: [0/0/2] packet_len=12
channel_id=130 packet_id=39 state=0x4 timestamp=0x0
*Jul 24 14:16:38.152 AEST: htsp_timer - 2000 msechtsp_release_req: cause 16,
no_onhook 0
*Jul 24 14:16:38.156 AEST: htsp_process_event: [0/0/2, FXOGS_ONHOOK,
E_HTSP_RELEASE_REQ]fxogs_onhook_release
*Jul 24 14:16:38.156 AEST: htsp_timer_stop2
*Jul 24 14:16:38.156 AEST: htsp_timer_stop3
*Jul 24 14:16:38.156 AEST: TGRM: reg_invoke_tgrm_call_update(0, 0, 2, 65535,
1, TGRM_CALL_IDLE, TGRM_CALL_VOICE, TGRM_DIRECTION_OUT)
*Jul 24 14:16:38.160 AEST: flex_dsprm_close_cleanuphtsp_allocate_if --

*Jul 24 14:16:38.176 AEST:  HTSP endpoint_info=aaln/S0/SU0/3, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!

*Jul 24 14:16:38.176 AEST: htsp_timer_stop3 htsp_setup_req
*Jul 24 14:16:38.180 AEST: htsp_process_event: [0/0/3, FXOGS_PARK,
E_HTSP_SETUP_REQ]htsp_busy_setup_reqhtsp_release_req: cause 17, no_onhook 0
*Jul 24 14:16:38.184 AEST: htsp_process_event: [0/0/3, FXOGS_PARK,
E_HTSP_RELEASE_REQ]
*Jul 24 14:16:38.184 AEST: fxogs_park_release_req
*Jul 24 14:16:38.188 AEST: flex_dsprm_close_cleanuphtsp_allocate_if --

*Jul 24 14:16:38.192 AEST:  HTSP endpoint_info=aaln/S0/SU0/2, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!
htsp_allocate_if --

*Jul 24 14:16:38.212 AEST:  HTSP endpoint_info=aaln/S0/SU0/2, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!
htsp_allocate_if --

*Jul 24 14:16:38.216 AEST:  HTSP endpoint_info=aaln/S0/SU0/3, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!
htsp_allocate_if --

sjp-2801-01#u all
*Jul 24 14:16:38.236 AEST:  HTSP endpoint_info=aaln/S0/SU0/3, type=2,
under_specified=0,
               service_type=2htsp_allocate_if: MATCH!

*Jul 24 14:16:38.420 AEST: htsp_process_event: [0/0/2, FXOGS_ONHOOK,
E_DSP_SIG_0110]
*Jul 24 14:16:38.420 AEST: fxogs_line_reversal_clid_wait. On_hook line
reversal detected possibily due to crossed cable
sjp-2801-01#u all
*Jul 24 14:16:40.152 AEST: htsp_process_event: [0/0/2, FXOGS_ONHOOK,
E_HTSP_EVENT_TIMER]
*Jul 24 14:16:40.152 AEST: [0/0/2, FXOGS_ONHOOK, E_HTSP_EVENT_TIMER]  ->
ERROR: INVALID INPUT

I hope that you can help me make more scene of this.

Thanks

2008/7/24 Joe Cisco <smetsysocsic at gmail.com>:

> If you telnet to the gateway, do a "terminal monitor" then issue a
> "debug vpm all". Try to dial out. If your ROUTE PATTERN(S) / ROUTE
> LIST(S) / ROUTE GROUP(S) are configured properly, you should see the
> call attempt to go out one of the FXO ports. If not, go back and trace
> thru the RPs/RLs/RGs and see if everything looks correct - especially
> make sure the route list is registered.
>
> Also, because it is MGCP, assuming you are using a lead 8 or lead 9
> for an outside access code, be sure you strip it off (probably in the
> route pattern) before you send the call out the gateway - UNLESS for
> some reason the POTS line is a plexar line and it expects a lead 9.
>
> -Joe C.
>
> On Wed, Jul 23, 2008 at 10:27 PM, Mark J <markju at gmail.com> wrote:
> > Thanks for prompt reply...
> >
> > Using MGCP
> >
> > Thanks
> >
> > 2008/7/24 Joe Cisco <smetsysocsic at gmail.com>:
> >>
> >> Are you using MGCP or H323?
> >>
> >> -Joe C.
> >>
> >> On Wed, Jul 23, 2008 at 10:07 PM, Mark J <markju at gmail.com> wrote:
> >> > Hey guys,
> >> >
> >> > I'm having an issues getting the FXO ports (outbound calls) working
> >> > successfully working on 2811 thru CCM.
> >> >
> >> > I have inbound calls working fine, just can't get outbound calls
> >> > working,
> >> > output tone is like a busy signal.
> >> >
> >> > Does anyone have a config that is working so that I can compare my
> >> > config?
> >> >
> >> > Thanks.
> >> >
> >> > _______________________________________________
> >> > cisco-voip mailing list
> >> > cisco-voip at puck.nether.net
> >> > https://puck.nether.net/mailman/listinfo/cisco-voip
> >> >
> >> >
> >
> >
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080724/76180ca0/attachment-0001.html>

More information about the cisco-voip mailing list