[cisco-voip] HP DL380 G5 servers

[Joe Cisco]

>From experience, uc6 is very particular - if you don't have exactly
the correct hardware the install will fail. We had a client running
CM4.2 on a pair of HP boxes (it hadn't been "tricked" onto the boxes)
and we were upgrading them to 6.1. The migration utility worked fine
with no "red flags" but once we began the actual 6.1 install it failed
with a "incompatible hardware" error. Turned out our processor wasn't
in the approved list. Customer had to purchase new hardware.

-Joe C.

On Thu, Jul 24, 2008 at 9:27 AM, Michael Back <Michael.Back at nisd.net> wrote:
> I think we will be purchasing our replacement servers from HP.  I was
> wondering if anyone has done this recently and could provide some
> guidance for doing this.  We want the 7845 equivalent of the HP server.
> Cisco has a document about the HP server solution that mentions a part
> number, but that part number is no longer available.  Does anyone have a
> new part number for a HP server that is approvid for Cisco stuff.  One
> of the HP reps we deal with sent me a quote on a similar server, but it
> was quad core instead of dual core.  Will that make a difference.  Also
> if anyone has had any problems installing CallManager or Unity on a HP
> server, I would like to know.  I tried talking to our Cisco SE about
> this, but he seemed reluctant to help me out.  Thanks for your help.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>