[cisco-voip] Mobile Connect (single number reach)

[Matthew Saskin]

-Configure remote destination profiles
-Assign a directory number to the remote destination profile
-Create remote destinations, assign them to aformentioned remote 
destination profile

Takes all of about 5 minutes to get up and rolling

Matthew Loraditch wrote:
> http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/6_1_1/ccmfeat/fsgd.pdf
> this doc has all the instructions albeit not in a nice little example configuration guide...
> If anyone else has or can find that I would be quite grateful..
> 
> 
> Matthew Loraditch
> 10944 Beaver Dam Road, Suite A
> Hunt Valley, Maryland  21030
> support at heliontechnologies.com
> (p) (410) 252-8830
> (F) (443) 541-1593
> 
> Visit us at www.heliontechnologies.com
> Support Issue? Email support at heliontechnologies.com for fast assistance!
> 
> 
> -----Original Message-----
> From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Joe Cisco
> Sent: Thursday, July 24, 2008 12:05 PM
> To: cisco-voip
> Subject: [cisco-voip] Mobile Connect (single number reach)
> 
> I've been told that Mobile Connect can be configured on UC6 without
> requiring a separate presence server. Has anyone had success with
> this? I'm unable to locate a procedure for configuring this without a
> separate presence server.
> 
> Thanks in advance,
> 
> Joe C.
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip