[cisco-voip] HDD LED on MCS7835H2-K9

[Matthew Linsemier]

Wil,

I am having exactly the same issue on my subscriber server.  All of my other
servers (pub, presence, UCCX) all show LED¹s on both drives.  I even swapped
a drive to see if it was the drive itself but no go.  I am going to open a
ticket with TAC to have the issue fixed as I suspect it¹s a hardware
failure.  Sounds like if you have the issue there may have been a bad batch
of 7835¹s with malfunctioning LED¹s.

Matt


On 7/27/08 6:17 PM, "William Roy" <William.Roy at l7.com.au> wrote:

>  
> 
> I have just built both a publisher and subscriber, CUCM version 6.1.2 on
> MCS7835H2-K9 hardware. Both servers have 2 x 72GB serial scsi drives in them.
> I have noticed that on both servers only one disk has a flashing green LED lit
> and the second HDD has no LEDs lit at all, is this correct behavior?
> 
>  
> 
> regards
> 
> Wil Roy
> 
> 
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip


CONFIDENTIALITY STATEMENT
This communication and any attachments are CONFIDENTIAL and may
be protected by one or more legal privileges. It is intended
solely for the use of the addressee identified above. If you
are not the intended recipient, any use, disclosure, copying
or distribution of this communication is UNAUTHORIZED. Neither
this information block, the typed name of the sender, nor
anything else in this message is intended to constitute an
electronic signature unless a specific statement to the
contrary is included in this message. If you have received this
communication in error, please immediately contact me and delete
this communication from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080727/bb9ee147/attachment.html>