[cisco-voip] Linetext label in SRST?

[Gheorghe PLETEA]

It is a way, but not exactly SRST.
I remember, I configure once (as a test) CME instead of SRST, and it
works.
SO, you need to put, on the SRST gateway, the configuration for CME
(telephony-service, ephones and ephone-DNs).
This config is static, so, if you change something on the CallManager,
you'll need to modify the config in the gateway also.

George

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Jonathan
Charles
Sent: Wednesday, 30 July 2008 5:45 a.m.
To: Cisco VOIP Newsletter - puck.nether.net
Subject: [cisco-voip] Linetext label in SRST?

It appears to not be retained... any way to make it stay?



Jonathan
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip


TelstraClear - Best speed, Best price, Best performance, Best loved, Best join.... phone Residential 0508 888 800  Business 0508 249 777

This email contains information which may be confidential and subject to copyright.  If you are not the intended recipient you must not use, distribute or copy this email or attachments.  If you have received this email in error please notify us immediately by return email and delete this email and any attachments.  
TelstraClear Limited accepts no responsibility for changes made to this email or to any attachments after transmission from TelstraClear Limited.  It is your responsibility to check this email and any attachments for viruses.   
Emails are not secure.  They can be intercepted, amended, lost or destroyed and may contain viruses.  Anyone who communicates with TelstraClear Limited by email is taken to accept these risks.