[cisco-voip] Subsquent node
Jonathan Charles
jonvoip at gmail.com
Wed Jul 30 01:12:19 EDT 2008
If this were the issue the install would have failed...
Is it possible the password on the sub is wrong?
Jonathan
On Tue, Jul 29, 2008 at 6:18 PM, Joe Cisco <smetsysocsic at gmail.com> wrote:
> After you deleted the old sud did you notice a server license
> available under the license unit report? If so, did you then add the
> new server under SYSTEM/SERVERS on the PUB before you tried to start
> the service on the SUB?
>
> -Joe C.
>
> On Tue, Jul 29, 2008 at 5:08 PM, Scott Voll <svoll.voip at gmail.com> wrote:
>> I have a new cluster I'm bring up with 6.1.2 with a DMA from 4.1.3.
>>
>> 1st Node came up fine.
>>
>> I'm installing on new HW so I called them different names
>>
>> once the pub was up and I got my licensing I deleted the old sub name and
>> put in the new Sub name
>>
>> now when trying to start the services on the Sub I get Connection to the
>> server cannot be established (unknown error)
>>
>> Any ideas?
>>
>> I have a TAC ticket open
>>
>> Scott
>> _______________________________________________
>> cisco-voip mailing list
>> cisco-voip at puck.nether.net
>> https://puck.nether.net/mailman/listinfo/cisco-voip
>>
>>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
More information about the cisco-voip
mailing list