[cisco-voip] 2port mft data and voice

[Joe Cisco]

Yes. I've done it several times. Be sure you clock correctly.

Also, in the UC GUI, be sure you list the card as a 2 port MFT card
(especially if you are using the "ccm-manager config" command) but
don't configure the 2nd port as anything in the GUI.

-Joe C.

On Wed, Jul 30, 2008 at 8:22 AM, Voice Noob <voicenoob at gmail.com> wrote:
> Can I use a 2port MFT card and bring a voice PRI in on one port and a data
> T1 on the other port?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>