[cisco-voip] Subsquent node

[Scott Voll]

I had CMPUB and CMSUB in my 4.1 enviroment.

Installed CM 6.1 with CM1 with the DMA..

Brought up the second Node as CM2.

Deleted CMSUB from the CM1 config and added CM2. (still have a Node license
available)

Now I get the error, "Connection to the server cannot be established
(unknown Error)" when trying to start the services on CM2

Need to have TAC do what?

I just reinstalled CM2 per TACs request.

Scott
SR 609213575


On Wed, Jul 30, 2008 at 4:57 AM, Wes Sisk <wsisk at cisco.com> wrote:

> if you are reusing the same IP and just changing the name you are going to
> need some TAC assistance.  cluster manager does not properly clean up hosts,
> rhosts, sqlhosts for all the references to the old name.
>
> /Wes
>
> Scott Voll wrote:
>
>   I have a new cluster I'm bring up with 6.1.2 with a DMA from 4.1.3.
>
> 1st Node came up fine.
>
> I'm installing on new HW so I called them different names
>
> once the pub was up and I got my licensing I deleted the old sub name and
> put in the new Sub name
>
> now when trying to start the services on the Sub I get Connection to the
> server cannot be established (unknown error)
>
> Any ideas?
>
> I have a TAC ticket open
>
> Scott
>
> ------------------------------
>
> _______________________________________________
> cisco-voip mailing listcisco-voip at puck.nether.nethttps://puck.nether.net/mailman/listinfo/cisco-voip
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080730/0b7fe0e2/attachment-0001.html>