[cisco-voip] Admin Workstation error

[Matthew Saskin]

Are you running config manager from a terminal service session? If so, 
that won't work.

You need to be
a) in front of the server itself
b) connected via a "console" connection (VNC, PCAnywhere, etc.)
c) if using win2k3 server, you can use remote desktop with the /console 
switch

-matt

Garima Parghi wrote:
>
> I had to rebuild our AW distributor. Install went fine but when trying 
> to access configuration manager. I am getting “cannot connect to 
> central controller” error message. I have checked the registry ports 
> and they match.
>
> Any suggestions is appreciated
>
> Thanks!
>
> Garima Parghi | Jr. IPT Engineer
>
> o: 847-583-2225 | c: 847-877-8766
>
> The information contained in this message may be confidential and is for the intended addressee only.
> Any unauthorized use, dissemination of the information, or copying of this message is prohibited. 
> If you are not the intended addressee, please notify the sender immediately and delete this message.
>   
> ------------------------------------------------------------------------
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>