[cisco-voip] VG224

[Paul]

If you have a newer 2800/3800 box, you can have up to 10 FXO ports on an EVM-HD module.



----- Original Message ----
From: Lelio Fulgenzi <lelio at uoguelph.ca>
To: Ted Gibson <telepresence at mail.com>; Jason Aarons \\(US\\) <jason.aarons at us.didata.com>; cisco-voip at puck.nether.net
Sent: Wednesday, July 30, 2008 3:53:24 PM
Subject: Re: [cisco-voip] VG224


I don't think they make 24port FXO. The only high 
density FXO is the NM-HDA-4FXS
http://cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet09186a00800921e7_ps274_Products_Data_Sheet.html
you can add up to 8 FXO ports on this 
module.
 
Lelio
--------------------------------------------------------------------------------
Lelio 
Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario 
N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX 
(JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...seen on a Geek Squad patch cord: "While it is the same length, this 7' 
crossover cable
is not regulation issue for most competitive Manhattan double 
dutch leagues.
----- Original Message ----- 
From: Ted  Gibson 
To: Jason Aarons \\(US\\) ; Ted Gibson ; cisco-voip at puck.nether.net 
Sent: Wednesday, July 30, 2008 6:27  PM
Subject: Re: [cisco-voip] VG224

Can I use a 24 FXO anlog card in a router?
 
Ted


-----  Original Message -----
From: "Jason Aarons \(US\)" 
To: "Ted Gibson" , cisco-voip at puck.nether.net
Subject:  RE: [cisco-voip] VG224
Date: Wed, 30 Jul 2008 16:37:08 -0400

 
The  VG224 is FXS only product.  You could have PRI T1 to router and router  to VG224 with dial-peers.
 
From:cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Ted  Gibson
Sent: Wednesday, July 30, 2008 4:30 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] VG224
 
I want to connect analog extensions from a PBX to VG224  (FXO) and install a second VG224 on the network with analog phones ( FXS)  with no CCM.
I have done this many times an Audiocode MP but not with  a Cisco, my customers wants to use on lyc Cisco.
Has anyone done this before just use the VG224 as IP FXO  to FXS gateway? 
 
Ted Gibson

-- 
Be Yourself @ mail.com!
Choose From 200+ Email  Addresses
Get a Free Account at www.mail.com!
________________________________
 
Disclaimer: This e-mail communication and any attachments may  contain confidential and privileged information and is for use by the  designated addressee(s) named above only. If you are not the intended  addressee, you are hereby notified that you have received this communication  in error and that any use or reproduction of this email or its contents is  strictly prohibited and may be unlawful. If you have received this  communication in error, please notify us immediately by replying to this  message and deleting it from your computer. Thank you. 
-- 
Be Yourself @ mail.com!
Choose From 200+ Email Addresses
Get a Free Account at www.mail.com!
________________________________
 _______________________________________________
cisco-voip mailing  list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip



      
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080730/2723f167/attachment.html>