[cisco-voip] Bulk Update a speed dial?

[Madziarczyk, Jonathan]

Oh, heh, sorry.

I'm on 4.2(3) right now.  The speed dial is for a pager that calls
security.  They're switching to a cell phone :)

JM

-----Original Message-----
From: Kris Seraphine [mailto:baryonyx5 at gmail.com] 
Sent: Thursday, July 31, 2008 10:07 AM
To: Madziarczyk, Jonathan
Cc: cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Bulk Update a speed dial?

You don't say which version of CM but if you're using 5.x you could do
it through sql.  Something like this may work:

run sql update speeddial set speeddialnumber = <new number> where
speeddialnumber = <old number>

I'd recommend trying it on a non-production system first to test.

Another option would be to create a translation pattern that matches
the old number and translate it to the new number.  You then wouldn't
have to modify the speed dial at all.

On Thu, Jul 31, 2008 at 8:21 AM, Madziarczyk, Jonathan
<JMad at cityofevanston.org> wrote:
> Hi,
>
>
>
>   One of our sites changed a speed dial number and I'm trying to
figure out
> how to do ~100 phones in our system through the BAT or something
> similar....any ideas?
>
> _______________________________________________
> cisco-voip mailing list
> cisco-voip at puck.nether.net
> https://puck.nether.net/mailman/listinfo/cisco-voip
>
>



-- 
kris seraphine