[cisco-voip] Dial-peers gone crazy...

[Anthony Kouloglou]

Hi,
i have a 2800 series router with one E1 and 2 FXOs where FCTs are connected
I have one dial-peer pots pointing to E1 and 5-6d dial-peer pots 
pointing to FXOs so only specific destinations are routed via the FCTs.
One of these dial-peers are like this:

dial-peer voice 6000 pots
destination-pattern 69123456
 prefix 69123456
 port 0/2/0

and also:

dial-peer voice 2 pots
destination-pattern 6.......
 prefix 6
 port 0/3/0:15

All seem to work well until cell phone with number 69123456 did not call 
the FCT number but the E1 number.
Then, as the voip ccapi debug showed, the incoming number matched 
dial-peer 6000 and so the caller got dial-tone of the router instead of 
being routed to the console number (there is translation profile applied 
at the voice port which works fine for all other calling numbers that do 
not match any dial-peer)

Could someone help one this?

Thanks
akoul