[cisco-voip] Setting up a SIP trunk...anything special?

[Lelio Fulgenzi]

I am setting up a SIP trunk to a Cistera appliance (I believe they are using asterisk) in order for the box to dial out. The SIP trunk setup went fine and without incident. Is there anything else I need to do? Someone mentioned to me a while back that I would need something else like a transcoder.

Any pointers would be great.

Thanks,

Lelio
--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
...seen on a Geek Squad patch cord: "While it is the same length, this 7' crossover cable
is not regulation issue for most competitive Manhattan double dutch leagues.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080731/52e8df48/attachment.html>