[cisco-voip] Volume 1 -- Section 6 (Dial Plan) question

[Lelio Fulgenzi]

yup. pretty much. 

--------------------------------------------------------------------------------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
"Bad grammar makes me [sic]" - Tshirt

  ----- Original Message ----- 
  From: Michael Thompson 
  To: 'Lelio Fulgenzi' ; 'VoIP' 
  Sent: Thursday, July 31, 2008 10:32 PM
  Subject: RE: [cisco-voip] Volume 1 -- Section 6 (Dial Plan) question


  That makes more sense, thank you!

  So essentially what that comment is stating is to make sure we have a dial peer like:

  Dial-peer 1 voice pots

  Direct-inward-dial

  Incoming called-number .

  Port blah blah blah

   

   

   

   


------------------------------------------------------------------------------

  From: Lelio Fulgenzi [mailto:lelio at uoguelph.ca] 
  Sent: Thursday, July 31, 2008 10:26 PM
  To: Michael Thompson; 'VoIP'
  Subject: Re: [cisco-voip] Volume 1 -- Section 6 (Dial Plan) question

   

  two stage dialing is when you dial a number assigned to one of your trunks/lines attached to your router and it gives you a local dialtone. from there you can dial any of the dialpeers that inbound trunk has access too.

   

  i believe it's biggest use is for those LD resellers. you can add a TCL script app to the system to check for PINs and balance owing etc.

   

  by doing something line DID . <- notice the DOT, it sends the DID to the system for interpretation. or something like that.

   

  --------------------------------------------------------------------------------
  Lelio Fulgenzi, B.A.
  Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
  (519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
  ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
  "Bad grammar makes me [sic]" - Tshirt

    ----- Original Message ----- 

    From: Michael Thompson 

    To: 'VoIP' 

    Sent: Thursday, July 31, 2008 10:07 PM

    Subject: [cisco-voip] Volume 1 -- Section 6 (Dial Plan) question

     

    I'm going through and reviewing some of the material and there's a specific comment that I'm stuck on.  Task 6.6, it states:

     

    Enable DID for PSTN users dialing into CM/UCME (.i.e. 2-stage dialing must not be used).  

     

    I don't understand what they're referring to by 2-stage dialing.

     

    Are they just looking for something as simple as the direct-inward-dial on CME and making sure we're sending 4 significant digits on the Trunks of UC?

     

    MT

     

     

     


----------------------------------------------------------------------------

    _______________________________________________
    cisco-voip mailing list
    cisco-voip at puck.nether.net
    https://puck.nether.net/mailman/listinfo/cisco-voip
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <https://puck.nether.net/pipermail/cisco-voip/attachments/20080731/d83577b8/attachment.html>