[cisco-voip] dtmf not working with cme and mpx2

[Vince Loschiavo]

try this.

dial-peer voice 90 voip
 description DialPeer to Meetingplace Express
 destination-pattern 8050
 session protocol sipv2
 session target ipv4:192.168.238.33<http://192.168.238.33/>
 dtmf-relay rtp-nte
 codec g711ulaw
 no vad

____________________________________________________________
Vincent Loschiavo
Cisco Practice Director
Datacorp
18503 Pines Blvd
Suite 213
Pembroke Pines, FL, 33029
"Cisco Advanced Unified Communications Partner"
Cell Phone:       786-282-1164
Office Phone:    954-671-5669
Office Main:      305-594-6933
____________________________________________________________



________________________________
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Grace
Sent: Friday, February 29, 2008 4:00 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] dtmf not working with cme and mpx2

we are trying to configure a mpx w/ cme. we dial the pilot number and connect to mpx.  And then mpx will not take the prompts.  Something is wrong with dtmf.  I configured dial peer

dial-peer voice 8050 voip
 description MeetingplaceX
 destination-pattern 8050
 session protocol sipv2
 session target ipv4:192.168.238.33<http://192.168.238.33>
 dtmf-relay sip-notify
 codec g711ulaw
 no vad

Is there something im missing in CME

--
James Grace
CCVP CCNP CCNA MCSE MCDBA
System Engineer / Consultant
Email: grace.jd at gmail.com<mailto:grace.jd at gmail.com>

MSN IM: grace.jd at gmail.com<mailto:grace.jd at gmail.com>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080303/1f3ef5cf/attachment-0001.html