[cisco-voip] Displayed zeros on 7940/60 phones

[Wes Sisk]

the slash is intentional CSCsd25421.  It needs to be present to 
distinguish O and 0.

/wes

Matthew Melbourne wrote:
> I recently upgraded a 7940 to 8.0(8) from 7.3(2), and have since
> downgraded it again and have noticed that any zeros (e.g. in the time,
> date, DN etc) have a line through them, whereas before they didn't.
>
> The firmware is back to the same version, and I've factory reset the phone
> and deleted it and added it back into CallManager. Other phones which have
> stayed at 7.3(2) are unaffected and display zeros correctly.
>
> Cheers,
>
> Matt
>
>