[cisco-voip] Getting a tone when dialing long distance

[Matt Slaga (US)]

You've got overlap dialing with another pattern or extension.  Check
your other patterns and make sure they are marked for outside dial tone
as well.

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Kevin LaMarca
Sent: Tuesday, March 04, 2008 3:23 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Getting a tone when dialing long distance

 

A couple of weeks ago we started getting a tone when dialing long
distance. When we start the dial sequence, i.e. 9,1,215XXXXXXX we will
hear a tone when the 1 in the area code is pressed. Depending upon the
area code the tone will happen in a different spot. Again this just
started happening. We are using Cisco CM 4.1.




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080304/742ecf8b/attachment.html