[cisco-voip] CUCM 4.2(3) to 6.1

[Nick Griffin]

Have you personally seen it take that much longer? The issue is it pegs the
cpu at 100%, causing some issues. Thanks

On Wed, Mar 5, 2008 at 3:06 PM, James Buchanan <jbuchanan at ctiusa.com> wrote:

>  Sometimes, purging the CAR/CDR data can speed this up. Otherwise, just
> wait it out.
>
>
>
> *From:* cisco-voip-bounces at puck.nether.net [mailto:
> cisco-voip-bounces at puck.nether.net] *On Behalf Of *Nick Griffin
> *Sent:* Wednesday, March 05, 2008 2:56 PM
> *To:* cisco-voip at puck.nether.net
> *Subject:* [cisco-voip] CUCM 4.2(3) to 6.1
>
>
>
> I'm attempting to run the DMA 6.1.1a tool to gather data from a publisher
> at 4.2(3). Prior to running dma I ran the upgrade assistant to make sure
> things are in order, replication/etc. The process appears to get through the
> initial phases very quickly, it then reaches the end stages of accessing and
> validating the database, it estimates 48 minutes. The first time I let it
> ran well over an hour, closer to 2 however it never completed. I cancelled
> the export, and there were two warning for 2 users with invalid primary
> extensions. It ended up creating the tar file (around 45MB, this seems
> small!) I've since fixed those issues and have attempted to run the dma
> again and it appears to again be hanging. Has anyone ran into this
> situation? I am currently awaiting a response from tac.
>
>
>
> Thanks in advance,
>
>
>
> Nick Griffin
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080305/e27c0b76/attachment.html