[cisco-voip] Collect Call is not accept
mianni at bovespa.com.br
mianni at bovespa.com.br
Thu Mar 6 10:08:20 EST 2008
Is that diagram accurate though?
- Yes
You're not connected directly to the PSTN?
- No, I´m not connected directly to the PSTN. I have to pass GW and
PBX to call to PSTN.
There's another PBX in front of you?
- No, I have only one.
In this debug, I called from PSTN (1195255680) to my IP phone (2030). Note
that PBX remove some digits and forward my extention.
Mar 6 11:43:11: ISDN Se1/0:15 Q931: RX <- SETUP pd = 8 callref = 0x5F00
Bearer Capability i = 0x9090A3
Standard = CCITT
Transfer Capability = 3.1kHz Audio
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA18381
Preferred, Channel 1
Progress Ind i = 0x8183 - Origination address is non-ISDN
Calling Party Number i = 0x0180, '1195255680'
Plan:ISDN, Type:Unknown
Called Party Number i = 0x80, '2030'
Plan:Unknown, Type:Unknown
Sending Complete
Mar 6 11:43:11: ISDN Se1/0:15 Q931: TX -> CALL_PROC pd = 8 callref =
0xDF00
Channel ID i = 0xA98381
Exclusive, Channel 1
Mar 6 11:43:11: ISDN Se1/0:15 Q931: TX -> ALERTING pd = 8 callref =
0xDF00
Mar 6 11:43:16: ISDN Se1/0:15 Q931: RX <- DISCONNECT pd = 8 callref =
0x6300
Cause i = 0x8090 - Normal call clearing
Mar 6 11:43:16: ISDN Se1/0:15 Q931: TX -> RELEASE pd = 8 callref = 0xE300
Mar 6 11:43:16: ISDN Se1/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref =
0x6300
Mar 6 11:43:17: ISDN Se1/0:15 Q931: TX -> CONNECT pd = 8 callref = 0xDF00
Mar 6 11:43:17: ISDN Se1/0:15 Q931: RX <- CONNECT_ACK pd = 8 callref =
0x5F00
Mar 6 11:43:18: ISDN Se1/0:15 Q931: RX <- DISCONNECT pd = 8 callref =
0x5F00
Cause i = 0x8090 - Normal call clearing
Mar 6 11:43:18: ISDN Se1/0:15 Q931: TX -> RELEASE pd = 8 callref = 0xDF00
Mar 6 11:43:18: ISDN Se1/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref =
0x5F00
Mar 6 11:43:19: ISDN Se1/0:15 Q931: TX -> DISCONNECT pd = 8 callref =
0xE400
Cause i = 0x8090 - Normal call clearing
Mar 6 11:43:20: ISDN Se1/0:15 Q931: RX <- RELEASE pd = 8 callref = 0x6400
Mar 6 11:43:20: ISDN Se1/0:15 Q931: TX -> RELEASE_COMP pd = 8 callref =
0xE400
Robert Kulagowski
<rkulagow at gmail.c
om> Para
Área: mianni at bovespa.com.br
cc
06/03/2008 11:37 cisco-voip at puck.nether.net
Assunto
Re: [cisco-voip] Collect Call is
not accept
mianni at bovespa.com.br wrote:
> I have a CCM 4.1.3 and my users can´t receive a collect call. The phone
> rings but when they hang off , the call is droped.
>
> PSTN ==> PBX ==> GW Router 2800 ==> CCM ==> phones
>
> Someone have a idea what is happening or why ???
# debug isdn q931
# term mon
Is that diagram accurate though? You're not connected directly to the
PSTN? There's another PBX in front of you?
As informações contidas nesta mensagem e nos arquivos anexados são para uso restrito, sendo seu sigilo protegido por lei, não havendo ainda garantia legal quanto à integridade de seu conteúdo. Caso não seja o destinatário, por favor desconsidere essa mensagem. O uso indevido dessas informações será tratado conforme as normas da empresa e a legislação em vigor.
The information in this e-mail and in the attached files are confidential and may be legally privileged. There is no legal guarantee as regards the reliability of said information. If you are not the intended recipient please disregard the content thereof. The unduly use of this information is subject to the rules of the company and the legislation in force.
More information about the cisco-voip
mailing list