[cisco-voip] 80GB SAS drive mirror

[Jason Aarons (US)]

A customer powered off their MCS-7825-H3 and replaced a bad 80 GB SAS
drive.

 

I'm used to the DL380-G3/SCSI where in Event Viewer log files you can
see the RAID array doing a interim rebuild, then after about 40 minutes
the raid mirror is completed per Event Viewer Log file.

 

I only see two Storage entries in Event Viewer about source: removable
storage, event "device interface removal" and then device interface
arrival, and I don't see OS 2000.4.4a with a HP Raid Configuration
Utility to view the current raid status. CallManager version is
4.1.3sr6.

 

How do I know the raid mirror was rebuilt with SAS drives?

 




-----------------------------------------
Disclaimer:

This e-mail communication and any attachments may contain
confidential and privileged information and is for use by the
designated addressee(s) named above only.  If you are not the
intended addressee, you are hereby notified that you have received
this communication in error and that any use or reproduction of
this email or its contents is strictly prohibited and may be
unlawful.  If you have received this communication in error, please
notify us immediately by replying to this message and deleting it
from your computer. Thank you.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080306/c4f71a75/attachment.html