[cisco-voip] FXS Port Fax configuration

[Jack Martin]

stcapp ccm-group 1
stcapp
!
!
voice service voip
 modem passthrough nse codec g711ulaw
!
!
voice-port 0/0/0
 station-id number 3456
!
!
dial-peer voice 1 pots
 service stcapp
 port 0/0/0
!
!
ephone-dn  1
 number 3456 no-reg primary
!
!
ephone  1
 device-security-mode none
 mac-address 7A6B.E2B0.0000
 type anl
 button  1:1



Jack Martin, CCVP
Network Engineer
Tushaus Computer Services
10400 Innovation Drive, Ste 100
Milwaukee, WI 53226
414.908.2222 Helpdesk
414.908.2267 Work
414.908.4467 Fax
414.477.6990 Cell


-----Original Message-----
From: cisco-voip-bounces at puck.nether.net [mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of "Gregor Weißenfels"
Sent: Monday, March 10, 2008 3:59 PM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] FXS Port Fax configuration

Hello Team,

we want use 4 analogue Faxes on a CME 4.1 with an 4-Port FXS Card. Which faxprotocol do we have to use?
Could somebody provide an running config for FXS ports?

TIA!

Gregor
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip