[cisco-voip] Cisco Channel Usage question

Joseph Mays mays at win.net
Tue Mar 11 12:48:35 EDT 2008


I sent this message to the list a bit ago, but I think my send may have 
preceded the activation of my membership to the list. My apologies if this 
message comes through twice.

I'm trying to send a call coming into a Cisco AS5400 out a pots line. What 
does it mean when the following call message is displayed:

023626: Mar 11 09:30:23.424 CST: %CALLTRKR-6-CALL_RECORD: ct_hndl=6868,
service=None, origin=Originate, category=Other, DS0
slot/port/ds1/chan=-1/-1/-1/-1, called=8009466382, calling=5460015, resource
slot/port=(n/a)/(n/a), userid=(n/a), ip=0.0.0.0, mask=0.0.0.0, account
id=(n/a), setup=03/11/2008 09:29:55, conn=0.00, phys=0.00, service=0.00,
authen=0.00, init-rx/tx b-rate=0/0, rx/tx chars=0/0, time=11.94, disc
subsys=CSM, disc code=0x2, disc text=Received an unexpected onhook event

Specifically, I'm wondering about the "DS0 slot/port/ds1/chan=-1/-1/-1/-1" 
entry. What does it mean when all -1's are displayed? In the dial-peer entry 
I am trying to route this to a POTS line on a DS1 in port 5 of slot 1.

nas01#show dialplan number 8009466382
Macro Exp.: 8009466382

VoiceEncapPeer8800
        peer type = voice, information type = voice,
        description = `',
        tag = 8800, destination-pattern = `800.......',
        answer-address = `', preference=0,
        CLID Restriction = None
        CLID Network Number = `'
        CLID Second Number sent
        source carrier-id = `', target carrier-id = `',
        source trunk-group-label = `',  target trunk-group-label = `',
        numbering Type = `unknown'
        group = 8800, Admin state is up, Operation state is up,
        incoming called-number = `', connections/maximum = 0/unlimited,
        DTMF Relay = disabled,
        huntstop = disabled,
        in bound application associated: 'DEFAULT'
        out bound application associated: ''
        dnis-map =
        permission :both
        incoming COR list:maximum capability
        outgoing COR list:minimum requirement
        Translation profile (Incoming):
        Translation profile (Outgoing):
        incoming call blocking:
        translation-profile = `'
        disconnect-cause = `no-service'
        type = pots, prefix = `',
        forward-digits default
        session-target = `', voice-port = `1/0:5:0',
        direct-inward-dial = disabled,
        digit_strip = disabled,
        register E.164 number with GK = TRUE
        fax rate = system,   payload size =  20 bytes

        Time elapsed since last clearing of voice call statistics never
        Connect Time = 0, Charged Units = 0,
        Successful Calls = 2, Failed Calls = 0, Incomplete Calls = 0
        Accepted Calls = 0, Refused Calls = 0,
        Last Disconnect Cause is "10  ",
        Last Disconnect Text is "normal call clearing (16)",
        Last Setup Time = 92636869.
Matched: 8009466382   Digits: 3
Target:

nas01#



More information about the cisco-voip mailing list