[cisco-voip] Transfer to Voicemail With a Pause

[Patrick Mowry]

I was pleasantly surprised by this after upgrading to Unity 5.  I do
have a general question to the group about *xxxx to voicemail.  Does
this interfere with any feaures with CallManger 6?  I can't think of any
off hand, but thought I'd ask since this type of direct transfer to
voicemail does not seem to be in the cisco documentation any more.

-Patrick
------------------------------
Date: Tue, 11 Mar 2008 22:37:20 -0400
From: "Justin Steinberg" <jsteinberg at gmail.com>
Subject: Re: [cisco-voip] Transfer to Voicemail With a Pause
To: "Scott Voll" <svoll.voip at gmail.com>
Cc: Josh Powers <JoshP at co.whitman.wa.us>, cisco-voip at puck.nether.net
Message-ID:
	<f1b65f880803111937s3fd86338r436e0094c80b1558 at mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"

try 8.2.1

On Tue, Mar 11, 2008 at 3:50 PM, Scott Voll <svoll.voip at gmail.com>
wrote:

> Well as they say, "its easier to eat crow while it's warm".  I stand
> corrected!
>
> Scott
>
> PS. do you have a TSP version number?
>
> On Tue, Mar 11, 2008 at 10:28 AM, Justin Steinberg
<jsteinberg at gmail.com>
> wrote:
>
> > the newer Unity TSPs fix this.  Install the latest TSP that is
> > compatible with your version of Unity and CM and the *xxxx transfer
will
> > work exactly as your want.
> >
> >
> > On Tue, Mar 11, 2008 at 1:26 PM, Scott Voll <svoll.voip at gmail.com>
> > wrote:
> >
> > > Nope..... I've been asking for the same thing for years.
> > >
> > > Best option is to have the VM greeting have a pause at the
beginning.
> > >
> > >
> > > wish I had a better answer ;-)
> > >
> > > Scott
> > >
> > >   On Tue, Mar 11, 2008 at 9:24 AM, Josh Powers
<JoshP at co.whitman.wa.us>
> > > wrote:
> > >
> > > >    This might be a strange question, we have a CTI Route Point
setup
> > > > in Call Manager (4.2(2)) that forwards any calls sent to **????
To
> > > > voicemail.  I assume that is fairly standard since our
installers just did
> > > > it.  However when we transfer to that extension the voicemail
begins
> > > > immediately.  We want to use the ** thing to transfer sales
calls and the
> > > > like to voicemail so we don't have to talk to them.  Not sure if
there is
> > > > any other option for doing this or if there is a way to make
unity pause
> > > > before starting a greeting in some way.
> > > >
> > > >
> > > >
> > > > Thanks in advance, this group is amazing.
> > > >
> > > >
> > > >
> > > > Josh Powers
> > > >
> > > > _______________________________________________
> > > > cisco-voip mailing list
> > > > cisco-voip at puck.nether.net
> > > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > > >
> > > >
> > >
> > > _______________________________________________
> > > cisco-voip mailing list
> > > cisco-voip at puck.nether.net
> > > https://puck.nether.net/mailman/listinfo/cisco-voip
> > >
> > >
> >
>