[cisco-voip] Echo Problems

[James Buchanan]

Sorry--what I wrote applies more to PRIs than analog. I failed to read
through the whole post.

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of James Buchanan
Sent: Wednesday, March 12, 2008 12:48 PM
To: Cliff Jeffcoat; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] Echo Problems

Hello,

I have used 12.4(15)T3 with great success, with an input of -3 and an
output of 3.

Thanks,

James

-----Original Message-----
From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Cliff Jeffcoat
Sent: Wednesday, March 12, 2008 11:27 AM
To: cisco-voip at puck.nether.net
Subject: [cisco-voip] Echo Problems

I am running in to a lot of echo problems with copper lines/fxo ports in
2811 routers.  Has anyone found a good IOS and input gain/output
attenuation that seems to work with the majority of installs?  What is
the best way to adjust based on the -dB in your experience.  Any tips
will be greatly appreciated.

Cliff Jeffcoat
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip
_______________________________________________
cisco-voip mailing list
cisco-voip at puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-voip