[cisco-voip] CUCM 6.1 Forwarding

Cliff Jeffcoat cjeffcoat at aaacooper.com
Wed Mar 12 15:56:00 EDT 2008


I recently upgraded from 4.2 to 6.1 and had the same issues.  I changed
the Service Parameter to activating device line and it did not work.  I
had to assign a CSS to all lines for CFA or any other forward to work.

 

2 other issues in 6.1 for me.

 

1.      If a line was forwarded at the time of upgrade and you went to
the line and put on a CSS the CFA still did not work, if you set the
number in the web interface it still did not work.  You call the
extension and get a fast busy.  If you took CFA off at the physical
phone and put the same number back in the CFA at the physical phone it
works fine.

2.      I had pickup group numbers in a feature partition.  The pickup
group still worked but would no longer give you the audio & visual
notification.  The solution was to assign the pickup group number to no
partition and it then worked.  TAC said it would be fixed in the next
release.

 

 

From: cisco-voip-bounces at puck.nether.net
[mailto:cisco-voip-bounces at puck.nether.net] On Behalf Of Lelio Fulgenzi
Sent: Wednesday, March 12, 2008 2:37 PM
To: Nick Griffin; cisco-voip at puck.nether.net
Subject: Re: [cisco-voip] CUCM 6.1 Forwarding

 

I think someone one the list mentioned this a while back. In pre 5/6 if
you had nothing configured on for forwarding CSS it used the device/line
CSS, basically following what the rest of the phone had. With 5/6 you
must specifically assign it something. I believe there are two
forwarding CSS so you can use the device/line approach with forwarding
as well.

 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/rel_notes/5_0_1/501cm
rn.html#wp54174

 


Call Forwarding Enhancements 


The Call Forward All (CFA) enhancement introduces a secondary Calling
Search Space (CSS) for the Call Forward All field. The secondary CSS for
CFA combines with the existing CSS for CFA to allow the support of
alternate CSS system configuration. 

When CFA is activated, only the primary and secondary CSS for CFA gets
used to validate the CFA destination and redirect the call to the CFA
destination. If these fields are empty, then null CSS gets used. The
combination of the line CSS and device CSS no longer gets used when CSS
for CFA is None. Only CSS fields that are configured in the primary CSS
for CFA and the secondary CSS for CFA fields get used. 

For more information, refer to Cisco CallManager Features and Services
Guide 5.0. 

Cisco CallManager Administration Configuration Tips 

* You must configure either primary Forward All Calling Search Space or
Secondary Forward All Calling Search Space or both for Call Forward All
to work properly. The system uses these concatenated fields (Primary CFA
CSS + Secondary CFA CSS) to validate the CFA destination and forward the
call to the CFA destination. 

 

Lelio
------------------------------------------------------------------------
--------
Lelio Fulgenzi, B.A.
Senior Analyst (CCS) * University of Guelph * Guelph, Ontario N1G 2W1
(519) 824-4120 x56354 (519) 767-1060 FAX (JNHN)
^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ 
Java-Clavis-Domus Theorem: The ability to keep your hands on the home
keys is inversely
related to the amount of caffeine ingested in the last 30 minutes. 

	----- Original Message ----- 

	From: Nick Griffin <mailto:nick.jon.griffin at gmail.com>  

	To: cisco-voip at puck.nether.net 

	Sent: Wednesday, March 12, 2008 3:26 PM

	Subject: [cisco-voip] CUCM 6.1 Forwarding

	 

	Whats the deal with the CFA on CUCM 5/6? I thought if you
enabled the
	service parameter "Calling Search Space Activation Policy" for
"with
	activating Device/Line CSS" It would use the settings from the
device for
	forwarding calls. I find I must set a CSS on the forwarding
containing the
	part I wish to reach. Am I missing something here? Thoughts
appreciated.
	
	My goal is to have a CFA that is the same for every site, with
the ability
	to call local, and use the appropriate GW set at the device.
Thoughts
	appreciated!

	 

	I'm grabbing a debug next. TIA

________________________________

	_______________________________________________
	cisco-voip mailing list
	cisco-voip at puck.nether.net
	https://puck.nether.net/mailman/listinfo/cisco-voip

-------------- next part --------------
An HTML attachment was scrubbed...
URL: https://puck.nether.net/pipermail/cisco-voip/attachments/20080312/10017690/attachment-0001.html 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: not available
Type: image/png
Size: 168 bytes
Desc: image002.png
Url : https://puck.nether.net/pipermail/cisco-voip/attachments/20080312/10017690/attachment-0001.png 


More information about the cisco-voip mailing list